The batteries in the apartment do not heat well, leaking or just out of date? We offer the best solution - installation of a heating radiator in Tallinn at Avgroup.
How to choose
Gone are the days, when all apartments had the same batteries. Today on sale there are devices that are neutral in design., appropriate in any room, and exclusive design models. Replacing heating radiators will freshen the interior, make it brighter and more modern.
You can install designs:
- steel - designed for low-rise buildings, where the coolant temperature does not exceed 110 ° С, and the working pressure 13 atm;
- aluminum - withstand pressure surges up to 18 atm, corrosion resistant;
- bimetallic - very strong and durable due to the steel collector located inside, surrounded by an aluminum shell;
- cast iron - classic heating devices, time-tested, slowly heat up, but they keep warm for a long time.
For the heating system to work efficiently after replacing the radiator, it is necessary to calculate the required power of the device and the required number of sections. The parameters of the networks are also taken into account - working pressure, temperature and quality of water treatment. Our consultants will help you make a calculation and choose the best model.
Accommodation rules
Most often, batteries are attached under window openings., along long walls, in corner rooms, near the front or balcony door. We recommend equipping all devices with thermostats, which allows you to maintain comfortable conditions and save heat.
To ensure air circulation, there must be free space around the radiator:
- from the wall - 25 mm;
- from the bottom surface of the window sill - 50 mm;
- by gender - 60 mm.
Consider, that when installing radiators in recessed niches or behind dense screens, heat losses are from 3 to 25% power.
Features of installing a radiator
Pendant models are fixed to the wall with brackets. They must be able to support the weight of the device when filled.. There are devices, which are installed on legs or embedded in floors. Hidden option used, if the house has large glazed openings in the floor.
The strapping can be diagonal, bottom or side. The most efficient in terms of heat transfer - diagonal. The lower one allows you to hide communications in the floor.
Prepared water or antifreeze is used as a heat carrier. They contain a minimum amount of substances harmful to metal, antifreeze in addition protects the system from freezing at low temperatures.
When installing the radiator, use:
- shut-off valves - ball and rod valves, helping to open the circuit during repairs without interfering with the rest of the heating;
- Mayevsky crane - a device for removing accumulated air from the system, which creates plugs and interferes with the normal circulation of the coolant;
- plugs - placed in the dead-end hole of the battery, block the flow of water or antifreeze;
- sealing materials - for sealing joints and joints;
- fasteners - dowels, self-tapping screws, anchors, brackets, etc..
If the system is gravity, radiators are mounted with a slope towards the supply pipe 1-1.5 °, to ensure complete drainage of the coolant. At the end of the installation, the master conducts hydraulic tests, to exclude leaks and incorrect operation of heating devices.
Installation of a heating radiator in Tallinn
In Avgroup you can order the installation or replacement of heating batteries in the apartment, home, office at the best prices. Our teams have professional knowledge and extensive experience. When performing work, quality is guaranteed, speed and accuracy.